Adjusting The Brake Lever Free Play - Yamaha TT-R110EF Owner's Manual

TIP
When tightening the locknut, hold the
clutch adjusting screw with a screw-
driver so that it does not turn together
with the locknut.
PERIODIC MAINTENANCE AND ADJUSTMENT
Adjusting the brake lever free
play
1
3
2
(b)
(a)
1. Rubber cover
2. Brake lever free play adjusting bolt
3. Locknut
4. Brake lever free play
The brake lever free play should mea-
sure 10.0–20.0 mm (0.39–0.79 in) as
shown. Periodically check the brake le-
ver free play and, if necessary, adjust it
as follows.
1. Slide the rubber cover back.
2. Loosen the locknut at the brake le-
ver.
3. To increase the brake lever free
play, turn the brake lever free play
adjusting bolt in direction (a). To
7-18
decrease the brake lever free play,
EAU44885
turn the adjusting bolt in direction
(b).
TIP
4
Skip steps 4–7 if the specified brake le-
ver free play could be obtained as de-
scribed above.
4. Fully turn the adjusting bolt at the
brake lever in direction (a) to loos-
en the brake cable.
5. Loosen the locknut at the brake
shoe plate.
6. To increase the brake lever free
play, turn the adjusting bolt at the
brake shoe plate in direction (a).
To decrease the brake lever free
play, turn the adjusting bolt in di-
rection (b).
7