Starting A Warm Engine; Shifting - Yamaha TT-R110EF Owner's Manual

Starting a warm engine

Follow the same procedure as for
starting a cold engine with the excep-
tion that the starter (choke) is not re-
quired when the engine is warm.
OPERATION AND IMPORTANT RIDING POINTS
EAU16641

Shifting

4
3
2
1
2
1. Shift pedal
2. Neutral position
This motorcycle has a 4-speed trans-
mission with a centrifugal, automatic
clutch. Shifting gears lets you control
the amount of engine power available
for starting off, accelerating, climbing
hills, etc.
The gear positions are shown in the il-
lustration.
TIP
To shift the transmission into the neu-
tral position, press the shift pedal down
repeatedly until it reaches the end of its
travel.
EAU39902
NOTICE
 Even with the transmission in
1
 Always release the throttle grip
To start out and accelerate
1. Close the throttle.
2. Shift into first gear and release the
6-2
the neutral position, do not
coast for long periods of time
with the engine off, and do not
tow the motorcycle for long dis-
tances. The transmission is
properly lubricated only when
the engine is running. Inade-
quate lubrication may damage
the transmission.
before changing gears to avoid
damaging the engine, transmis-
sion, and drive train, which are
not designed to withstand the
shock of shifting when the
throttle grip is open.
shift pedal. NOTICE: Always
close the throttle before shifting
gears, otherwise damage to the
engine and drive train may re-
sult.
[ECA15462]
ECA15442
6
EAU39912