Spoke Wheels; Adjusting The Clutch Free Play - Yamaha TT-R110EF Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
very carefully and replace it as
soon as possible with a high-
quality product.
 Ride
conservatively
changing a tire since the tire
must seat itself on the rim prop-
erly. Failure to allow proper
seating may cause tire failure,
which may result in damage to
the motorcycle and injury to the
rider.
7

Spoke wheels

WARNING
after
The wheels on this model are not
designed for use with tubeless tires.
Do not attempt to use tubeless tires
on this model.
To maximize the performance, durabil-
ity, and safe operation of your motor-
cycle, note the
regarding the specified wheels.
 The
wheel
checked for cracks, bends, warp-
age or other damage, and the
spokes for looseness or damage
before each ride. If any damage is
found, have a Yamaha dealer re-
place the wheel. Do not attempt
even the smallest repair to the
wheel. A deformed or cracked
wheel must be replaced.
 The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.
7-17
EAU21944

Adjusting the clutch free play

The clutch free play must be checked
EWA10611
and, if necessary, adjusted as follows
at the intervals specified in the periodic
maintenance and lubrication chart.
1. Loosen the locknut.
2. Slowly turn the clutch adjusting
following points
rims should be
1. Locknut
2. Clutch adjusting screw
3. Tighten the locknut to the speci-
Tightening torque:
screw in direction (a) until resis-
tance is felt, and then turn it 1/8
turn in direction (b).
(b) (a)
2
1
fied torque.
Locknut:
8 Nm (0.8 m·kgf, 5.8 ft·lbf)
EAU44664