Table of Contents
Advertisement
USING THE STAND MIXER
Remove the accessory: Turn the
speed control to "0", unplug the
Stand Mixer, and tilt the motor head
2
back; then, press the accessory
upward as far as possible, then turn
the accessory clockwise and pull it
away from the beater shaft.
OPTIONAL ATTACHMENTS
KitchenAid offers a wide range of optional attachments such as the spiralizer, pasta
cutters, or food grinders that may be attached to the Stand Mixer attachment power
shaft as shown here.
Check to be sure that the Stand
1
Mixer is unplugged, and the speed
control is turned to "0".
16 | USING THE STAND MIXER
Remove the bowl: Gently turn
3
the bowl counterclockwise to release
it from the bowl clamping plate.
Turn the attachment knob
2
counterclockwise to remove
attachment hub cover.
Advertisement
Table of Contents
