Care And Cleaning; Cleaning The Stand Mixer - KitchenAid 5KSM3311XBAC Quick Start Manual

USING THE STAND MIXER
Insert attachment into attachment
hub, making certain that attachment
power shaft fits into the square
attachment hub socket. It may be
3
necessary to rotate the attachment
back and forth. When it is in the
proper position, the pin on the
attachment will fit into the notch
on the hub rim.

CARE AND CLEANING

CLEANING THE STAND MIXER

IMPORTANT: Do not wash the wire whip in the dishwasher. Do not immerse the Stand
Mixer body in water or other liquids. These parts should be hand washed.
Turn the Stand Mixer off and unplug
before cleaning. Wipe the stand mixer
body with a soft, damp cloth. Do not
1
use household/commercial cleaners.
Wipe off the beater shaft frequently
to remove any accumulation of
residue. Do not immerse in water.
*Accessory sold separately
Tighten the attachment knob
by turning it clockwise until the
attachment is completely secured
4
to the Stand Mixer. See the
Instructions manual that came
with your attachment for detailed
directions on using the attachment.
The bowl, flat beater, dough hook,
flex-edge beater, and pouring shield*
(top shelf only) may be washed in a
2
dishwasher; or, clean them thoroughly
in hot, sudsy water and rinse
completely before drying. Do not
store beaters on the shaft.
CARE AND CLEANING | 17