Closing The E-Tube Project - Shimano SM-PCE02 Help Manual

Launching requirements
In order to use E-TUBE PROJECT, the SM-PCE1 / SM-PCE02 / SM-BCR2 must be connected to the PC.
When the SM-PCE1 / SM-PCE02 / SM-BCR2 connection request dialog box is displayed, connect the
SM-PCE1 / SM-PCE02 / SM-BCR2 to the PC using the USB cable.

Closing the E-TUBE PROJECT

Select [Exit] from the [File] menu on the menu bar. Alternatively, click the close button in the
top-right corner of the application screen.
When the Exit confirmation dialog box is displayed, click [OK] to close E-TUBE PROJECT.
E-TUBE PROJECT cannot be closed while firmware updating is still in progress.
*
LAUNCHING AND CLOSING THE E-TUBE PROJECT
11 / 34