Shimano SM-PCE02 Help Manual page 21

Error check
When a single unit or multiple units are connected, this function checks their operation and identifies
any units which have a problem.
Click [Error check] in the main menu screen to move to the error check screen.
Select the unit where its error check is performed and click [Start diagnosis]. The error check of the
selected unit is started. Perform operations following the instructions on the screen.
If you click [Skip], the diagnosis operations for the unit which is currently being diagnosed will be
*
skipped.
When performing a wireless function error check, a communication device compatible with ANT
*
connection is necessary as a compatible device. If no communication device is available, please skip
diagnosis using the following steps.
1. Click [Error check] in the main menu screen.
EACH FUNCTION OF E-TUBE PROJECT
21 / 34