Raider RD-GSSL01 User Manual page 11

1. General instructions for safe operation.
Read all instructions. Failure to follow the instructions may result in electric shock, fire and / or
serious injury. Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep work area clean and well lit. Cluttered and inadequate lighting may contribute to the
occurrence of accidents.
1.1.2. Do not operate cordless shrub shear in an environment with increased danger of
explosion, close to flammable liquids, gases or dust.
During operation of battery shrub shear can create sparks that can ignite the dust or fumes.
1.1.3. Keep children and bystanders away while operating a cordless shrub shear.
If your attention be diverted, you may lose control of battery shrub shears.
1.2. Safety when working with electricity.
1.2.1. Plug the charger must be suitable for use contact. In no case be allowed to modify the
plug. When working with zeroed appliances do not use adapters plug.
Unmodified plugs and sockets reduce the risk of electric shock.
1.2.2. Protect cordless shrub shear from rain and moisture.
Water entering a cordless shrub shear increases the risk of electric shock.
1.3. Safe way of working.
1.3.1. Be alert, watch carefully their actions and act cautiously and wisely. Do not use
rechargeable shrub shears when you are tired or under the influence of drugs, alcohol or
medication.
A moment of inattention while operating cordless shrub shear can have the effect of severe
injuries.
1.3.2. Use personal protective clothing and always wear eye protection.
Wearing suitable for use cordless shrub shear and activity carried personal protective
equipment such as dust mask, healthy tightly closed shoes with a stable tread protective helmet
and silencers (earplugs) reduces the risk of accident.
1.3.3. Avoid the danger of inclusion of battery shrub shears inadvertently. Carrying cordless
shrub shear with your finger on the switch, there is a risk of accident.
1.3.4. Do not overreach. Work in a stable body position and at any time maintain balance. So
you can control the battery shrub shears better and safer unexpected situations.
1.3.5. Dress properly. Do not operate with loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts of battery shrub shears. Loose clothes, jewelery or long hair
can be caught in the chuck.
1.4. Care of the battery shrub shears.
1.4.1. Do not overload the battery shrub shears. Use cordless shrub shear only according to
its purpose. You will work better and safer when using the appropriate cordless shrub shear in
specified by the manufacturer load range.
1.4.2. Keep battery shrub shears in places where it can be accessed by children. Do not allow it
to be used by persons who are not familiar with how to operate it and not read these instructions.
When in the hands of inexperienced users, cordless shrub shear can be dangerous.
1.4.3. Keep cordless shrub shear care. Check that the mobile units are functioning flawlessly,
if not spells that have broken or damaged parts that violate or alter the functions of battery shrub
shears. Before using battery shrub shears damaged, have the tool repaired. Many accidents are
caused by poorly maintained power tools.
1.4.4. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less resistance and working with them easier.
1.4.5. Use rechargeable shrub shears, attachments and tools, according to the manufacturer's
instructions. Respecting and specific working conditions and operations that must follow. Using a
cordless shrub shear for other than those intended increases the risk of occurrence of accidents.
1.5. Instructions for safe handling specific to your purchased cordless shrub shear.
Attention! Loss of control over the power tool may result in the occurrence of accidents.
1.5.1. Do not use accessories that are not recommended by the manufacturer specifically for
this power tool. The fact that you can attach to the machine definitely accessory or working tool,
not ensure safe handling.
1.5.2. Never place your hands near the rotating work tools.
1.5.3. If you run activities where there is a risk cutting tool may contact hidden wiring, hold the
11