Table of Contents
Advertisement
SD
The power generated by the solar panels has decreased to an insufficient
level. The SunOffDelay timer is activated and the remaining charge time is
displayed.
When the timer runs out, the charging session will stop.
CD
The ChargeDelay timer is activated. The remaining time before charging is
displayed.
Active charging session screen
3. When the available capacity of the power grid is
within the limits of the active charge mode and
any set delay has expired, the charging session
will automatically start.
Note: The charging LED lights up blue to indicate that a charging session is in progress.
Note: The charging cable is locked during charging and cannot be removed until the
charging session has ended.
7.2.2.
Using the Charge now feature
If you immediately need to start a charging session, you can switch to Smart charge mode
for one single charging session using the 'Charge now' feature.
Regardless of the active charge mode, e.g. smart solar, the charger immediately starts the
charging session if the available capacity on the power grid is within the set limits (I-Min and
I-Max).
1. Press
to access the Charge now feature from the Home screen.
2. Select YES using
Note: After the charging session has finished, the charger returns to the active charge
mode, e.g. smart solar.
www.ratio-electric.com
and press
to start the charging session.
Smart mode
1.0kW
MN
0.9kW
39
Advertisement
Table of Contents
