Advertisement
needed, through the Calibration function in the Elo driver control panel.
The iTouch Plus driver will only support multiple monitor if they are all using the iTouch Plus
touch technology.
For more configuration options, double click on the EloConfig desktop shortcut to open up the
Elo Touchscreen Configuration screen.
Projected Capacitive Touch Technology
When connected to Windows 7 or 8 computers, the touchmonitor can report 10 simultaneous
touches. When connected to Windows XP computers, the touchmonitor reports single touches.
No additional drivers are required for this technology to work with Windows 7 and 8, it uses
Windows HID drivers.
Refer to Chapter 2, Section "Installing the Touch Technology Software Drivers" to find
instructions to download touch drivers for Windows XP.
No calibration is required for this technology.
Gesture Support
The IntelliTouch Plus and Projected Capacitive touch technologies enable several gestures that
support single and multiple contacts. Refer to the Microsoft Website
http://msdn.microsoft.com/en-us/library/dd940543 on the various gestures that are supported in
Windows 7.
Video
A display's native resolution is its width and height measured in number of pixels. Generally, for
best performance, an image displayed on this monitor will look best when your computer's
output resolution matches this monitor's native resolution, which is 1024 x 768 for the 15-inch,
and 1280 x 1024 for the 17-inch.
User Manual: 1523L, 1723L
SW601951 Rev C, Page 13 of 26
Advertisement
