Pro-Form POWER 995i User Manual page 20

5. Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the
Incline increase and decrease buttons or one of the
numbered incline buttons. Each time you press one
of the buttons, the treadmill will gradually adjust to
the selected incline setting.
6. Follow your progress with the display.
As you walk or run on the treadmill, the display can
show the following workout information:
• The incline level of the treadmill
• Your heart rate (see step 7)
• Your power level in watts
• The speed of the walking belt
• The elapsed time
• Your pace
• The approximate number of calories you have
burned
• The distance that you have walked or run
Press the display icon
buttons to view the
desired information in the
display. If you press the
scan icon, the console
will continuously cycle
through all information.
As you exercise, the power ring will indicate
the approximate intensity level of your exercise.
To adjust the intensity level, press the Watts/Kg
increase or decrease button. The speed and/or
incline settings of the treadmill will automatically
increase or decrease to reach the desired intensity
level.
To reset the display, press the Stop button repeat-
edly, or remove the key and then reinsert the key.
7. Measure your heart rate if desired.
You can measure your heart rate using either the
handgrip heart rate monitor or a compatible heart
rate monitor. For information about purchasing
an optional chest heart rate monitor, see page
23.
The console is compatible with all BLUETOOTH
Smart heart rate monitors. To connect your heart
rate monitor to the console, see page 23.
Note: If you use both heart rate monitors at the
same time, the BLUETOOTH Smart heart rate
monitor will have priority.
Before using
the handgrip
heart rate mon-
itor, remove
the sheets of
plastic from
the metal con-
tacts on the
pulse bar. In
addition, make
sure that your
hands are
clean.
To measure
your heart rate, stand on the foot rails and hold
the pulse bar with your palms on the metal con-
tacts; avoid moving your hands. When your
pulse is detected, your heart rate will be shown.
For the most accurate heart rate reading, con-
ETPE13716
tinue to hold the contacts for about 15 seconds.
(PFTL13716)
8. Turn on the fan if desired.
The fan features several
speed settings. Press the fan
buttons repeatedly to select
a fan speed or to turn on or
turn off the fan.
20
®
Contacts