Pro-Form POWER 995i User Manual page 16

18. Carefully slide the Upright Crossbar (112)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar with the four 5/16"
x 3/4" Screws (109) that you removed in step 5
and four 5/16" Star Washers (11); start all four
Screws, and then tighten them.
19. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28). Note: Extra parts may be
included.
18
11 109
90
16
112
109 11
89