Table of Contents
Advertisement
2.
I/O CHECK
• For an easy and safe operation check of the sensors, the sensor input data is checked
when the copier is in standby (including when a misfeed or a malfunction occurs or when
a part is not correctly closed) to determine if signals are properly input.
1. Display the Tech. Rep. Mode screen.
2. Touch [I/O CHECK].
3. Touch [Printer].
4. Touch the button for the 3rd paper drawer.
5. Using a sheet of paper, activate the sensor and check the display in the Touch Panel.
(Paper present: 1; Paper not present: 0)
<3rd Drawer>
T-5
4348T504CA
Advertisement
Table of Contents
Troubleshooting
