Table of Contents
Advertisement
7 Surveys
This section describes how to create and manage pipe surveys (also called pipe inspections). The
controller generates a survey report when you export the survey; see
You can create basic or structured surveys. For structured surveys, the C550c controller supports WRc's
MSCC 3 through 5 survey standards; see
7.1 Create a new survey
Follow these steps:
1 In the home screen
2 In the Create survey dialog, set the survey details:
Name: The survey name defaults to the current date and time, but you can set a custom name.
Format: Choose one of the following:
-
Basic survey: You do not need to specify any details at this point. If required, you can later edit the
survey header to specify the operator (the person carrying out the survey), job number, date and time,
location of the survey, plus any remarks. See
-
Structured survey (WRc): You must choose the survey standard. For example, you can choose
MSCC5 Sewerage, MSCC5 Domestic or MSCC5 Highways. For a list of currently supported standards,
see
page
244.
page
(page
34), press the
247, and WinCan standards; see
Create survey button.
page
217.
C550c Operation Manual
page
218.
page
247.
www.cuesinc.com
7 Surveys
| 209
Advertisement
Table of Contents
