Table of Contents
Advertisement
INSTALLATION
INSTALLING AUXILIARY GRILL
38 | INSTALLATION
The auxiliary grill is an optional accessory. It can
be used to align the toe grill with the rest of the
cabinets (while not obstructing ventilation of
the ice maker).
NOTE: Install auxiliary grill only after finishing
the complete ice maker installation.
1
Remove packaging material and
discard it.
2
Remove the screws that are taped
inside the auxiliary grill.
3
Place grill onto cabinetry. Align part so
that grating pattern on the auxiliary
grill matches that of the toe grill on the
ice maker.
4
Center auxiliary grill on cut out for ice
maker. Mark hole locations on each
side of auxiliary grill on cabinet.
5
Using power drill and a 1/8" drill bit, drill
holes in cabinet. This is to fit screws of
size #8-18 x 0.750".
6
Using the TORX T20 screwdriver, screw
auxiliary grill into cabinet.
Advertisement
Table of Contents
