Table of Contents
Advertisement
Side /Guide Installation
Guide brackets can not be placed over drive assembly mounting brackets.
u Installing Fixed Side Rails
1
Insert drop in nuts into t-slot
on frame.
5
Align clamping block to drop
in nuts.
9
Tighten screws in clamping
blocks.
If sides have seals, speed of conveyor should be no faster than 30 feet per minute.
Side seals are designed for use with MAA Standard Urethane Belts.
2
Align guide brackets with
drop in nuts.
6
Insert screws through clamp-
ing block and into drop in
nuts.
2
x
10
Tighten screws in guide
clamps.
3
Insert socket head cap screw
through guide clamp and into
drop in nuts.
2
x
7
Loosen tracking block screws.
(Do not remove)
11
Retighten screws in track-
ing block.
AS40-CD Conveyors | Installation & Maintenance Instructions
4
insert two drop in nuts into
t-slot at tail end of frame.
2
x
8
Slide guide rail in between
clamps and frame until in
place.
2
x
2
x
9
Advertisement
Table of Contents
