Table of Contents
Advertisement
u Installing Adjustable Guide Brackets
1
Insert economy nuts into
t-slot of guiderail and slide
into position
2
x
5
Align guide bracket, keeping
the larger hole up, with drop
in nuts and insert screws.
9
Tighten cap screw.
13
Install guiderail and block
assembly over vertical
rods and adjust to desired height.
(Guide should NOT touch belt)
10
AS40-CD Conveyors | Installation & Maintenance Instructions
2
Loosely thread adjusting rod
into nuts.
2
x
6
Tighten socket head cap
screws.
10
Slide guiderail assembly
over vertical rods on
frame.
3
Place a cross block onto
each guiderail and set aside.
7
Insert a rod vertically through
the larger hole on top of
guide bracket.
11
Adjust guides to desired
width and tighten rods.
2
x
4
Insert drop in nuts into t-slot
on frame.
8
Secure rod from below with
socket head cap screw.
12
Tighten screw on cross
block to secure rod.
Advertisement
Table of Contents
