3)
If the vehicle supports both types of tests, then both types will be
shown on the screen for selection. (Figure 5.21)
4) Use the UP/DOWN scroll button, as necessary, to view the status
of the MIL light ("ON" or "OFF) and the following monitors:
For spark ignition engines:
MIS -- Misfire Monitor
FUEL -- Fuel System Monitor
CCM -- Comprehensive Component Monitor
EGR – EGR System Monitor
O2S -- O2 Sensors Monitor
CAT -- Catalyst Monitor
EVAP -- Evaporative System Monitor
HTR -- O2 Sensor Heater Monitor
AIR -- Secondary Air Monitor
HCAT -- Heated Catalyst Monitor
For compression ignition engines:
MIS -- Misfire Monitor
FUEL -- Fuel System Monitor
CCM -- Comprehensive Component Monitor
EGR – EGR System Monitor
HCCAT -- NMHC Catalyst Monitor
...............
I/M Readiness
1.Since DTCs Cleared
2.This Drive Cycle
Figure 5.21
36
.
Need help?
Do you have a question about the AutoLink AL619EU and is the answer not in the manual?
Questions and answers