Vivotek IP9165-LPC User Manual page 58

VIVOTEK
Please follow the steps below to set up a profile:
1. Select the Profile mode tab.
2. Select the applicable mode: Night mode or
Schedule mode. Please manually enter a range of
time if you choose the Schedule mode.
3. Configure Exposure control settings in the folowing
columns. Please refer to previous dicussions for
detailed information.
4. Click Save to enable the setting and click Close to
exit the page.
Lens configuration
If you apply a different lens to the camera, you can upload a different configuration file (containing
an image library) for the specific lens module without updating the entire firmware. Please contact
VIVOTEK's technical support for the supported Lens configuration files.
Note that applying a new lens configuration requires a camera reboot.
58 - User's Manual