Vivotek IP9165-LPC User Manual page 233

eptz
nanystream
iva
whitelight
<Not recommended to use
this>
0, <positive 0/7
integer>
0, <positive 0/7
integer>
<boolean> 0/7
<boolean> 0/7
0307a.
For "nvideoin" = 1, the definition is as
following:
A 32-bits integer, each bit can be set
separately as follows:
Bit 0 => 1st stream supports ePTZ or not.
Bit 1 => 2nd stream supports ePTZ or not, and
so on.
For nvideoin >= 2, the definition is different:
First all 32 bits are divided into groups for
channel.
Ex:
nvideoin = 2, bit 0~15 are the 1st group for 1st
channel, bit 16~31 are the 2nd group for 2nd
channel.
nvideoin = 3, bit 0~9 are the 1st group for 1st
channel, bit 10~19 are the 2nd group for 2nd
channel, bit 20~31 are the 3rd group for 3rd
channel.
Then, the 1st bit of the group indicates 1st
stream of a channel support ePTZ or not. The
2nd bit of the group indicates 2nd stream of a
channel support ePTZ or not, and so on.
* For most products, the last stream of a
channel will not support ePTZ. It is reserved
for full view of the channel. For some
dual-stream products, both streams support
ePTZ.
number of any media stream per channel
Indicate whether to support Intelligent Video
analysis
Indicate whether to support white light led.
* We replace this parameter with
"capability_daynight_c<0~(n-1)>_builtinwled
" when the version number (httpversion) is
equal or greater than 0309d.
VIVOTEK
User's Manual - 233