Vivotek IP9165-LPC User Manual page 234

VIVOTEK
iris
supportsd
fisheye
tampering
tamperingmode
adaptiverecording
adaptivestreaming
supporttriggertypes
storage_dbenabled
protocol_https
protocol_rtsp
protocol_sip
protocol_maxconnection
234 - User's Manual
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
tamper,toodark,toob 0/7
right,tooblurry
<boolean> 0/7
<boolean> 0/7
seq,boot,motion,net 0/7
workfail,recnotify,ta
mpering,vi,vadp,di,
volalarm,temperatu
re,pir, visignal,
backup,smartsd,
shockalarm,virestor
e
<product
dependent>
<boolean> 0/7
< boolean > 0/7
< boolean > 0/7
<boolean> 0/7
<positive integer> 0/7
Indicate whether to support iris control.
Indicate whether to support local storage.
The parameter is used to determine whether
the product is fisheye or not.
Indicate whether to support tampering
detection.
Available tampering mode list.
* Only available when "capability_tampering"
is 1.
Indicate whether to support adaptive
recording.
Indicate whether to support adaptive
streaming.
list all the trigger types which are supported in
the camera:
"seq" = Periodic condition
"boot" = System boot
"motion" = Video motion detection
"networkfail" = network connection failure
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi" = Virtual input (Manual trigger)
"vadp" = VADP trigger.
"di"= Digital input.
"volalarm" = Audio detection.
"temperature" = Temperature detection.
"pir" = PIR detection.
"visignal" = Video input signal loss.
"backup" = Backing up recorded files.
"smartsd" = Lifetime detection of SD card.
"shockalarm" = Shock detection.
"virestore" = Video input signal restore.
* Only available when [httpversion] >= 0301a
Media files are indexed in database.
Indicate whether to support HTTP over SSL.
Indicate whether to support RTSP.
Indicate whether to support SIP.
The maximum number of allowed