Vivotek IP9165-LPC User Manual page 306

VIVOTEK
axisf
digitalzoom
zoomenhance
returnhome
returnhomeinterval
idleaction_enable
idleaction_type
idleaction_interval
7.42 camera PTZ control (SD series)
Group: camctrl_c<0~(n-1)> for n channel products
capability_ptzenabled is 1)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
ccdtype
motortype
cameraid
panspeed
tiltspeed
306 - User's Manual
>_maxzoom
capability_ptz_c<0~(n-1)
>_minfocus ~
capability_ptz_c<0~(n-1)
>_maxfocus
<boolean>
<boolean>
<boolean>
1~999
<boolean>
home
1~999
VALUE
string[16]
string[16]
1 ~ 255
-5 ~ 5
-5 ~ 5
1/4 Custom home focus position.
1/4 Enable/disable digital zoom
1/4 Enable /disable zoom enhancement
1/4 Enable/disable return home while idle.
1/4 While idle over this time interval, idle
action will be taken.
1/4 Enable/disable idle action while idle
1/4 This field tells what kind of action should
be taken while idle.
1/4 While idle over this time interval, idle
action will be taken.
(the bit7 of capability_ptzenabled is 0 and the bit4 of
SECURITY DESCRIPTION
(get/set)
6/7 (Internal used, read only)
6/7 (Internal used, read only)
1/4 Camera ID controlling external PTZ
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera ID,
e.g. 2400bps, camera ID 1,2,3,,,,etc.
All Camera IDs on the same controlling
system (NVR or rs485 keyboard) have
to be distinct.
Therefore, once you send a controlling
signal, each camera will only accept the
inputs with the corresponding ID.
1/4 Pan speed
1/4 Tilt speed