Vivotek IP9165-LPC User Manual page 200

VIVOTEK
7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile> 0 and capability_daynight_c<0~(n-1)>_support > 0)
n denotes the value of "capability_nvideoin"
NAME
mode
sir
<product dependent>
daymodebegintime
daymodeendtime
disableirled
enableextled
enablewled
extledmode
200 - User's Manual
VALUE SECURITY
(get/set)
auto, 6/6
day,
night,
di,
schedule...etc
* Available values
are listed in
"capability_daynight
_c<0~(n-1)>_mod
e"
<product
dependent>
<boolean> 6/6
00:00~23:59 6/6
00:00~23:59 6/6
<boolean> 6/6
<boolean> 1/6
<boolean> 6/6
do, irring 6/6
* Available values
are listed in
"capability_daynight
_c<0~(n-1)>_extle
d_interface"
DESCRIPTION
Set IR cut control mode
Enable/disable Smart IR
* Only available when
"capability_daynight_c<0~"capability_nvideoi
n"-1>_smartir" is 1
Day mode begin time
Day mod end time
Enable/disable built-in IR led
(capability_daynight_c<0~"capability_nvideoi
n"-1>_builtinir > 0)
Enable/disable external IR led
(capability_daynight_c<0~"capability_nvideoi
n"-1>_externalir > 0)
Enable/disable built-in White led
(capability_daynight_c<0~"capability_nvideoi
n"-1>_builtinwled > 0)
Turn on an external IR led which is mounted do
(digital output) device or is a IR ring device.
* Only available when
"capability_daynight_c<0~"capability_nvideoi
n"-1>_externalir" is 1.
* Only valid when "ircutcontrol_enableextled"