Saving Setup Files - JVC GY-HM660E Instructions Manual

Saving Setup Files

1 Display the [Setup File] menu.
Select [Main Menu] B [System] B [Setup File]
and press the Set button (R).
(A P115 [ Setup File ] )
2 Select [Store File] and press the Set button
(R).
3 Select [Picture File], [User File] or [All File],
and press the Set button (R).
The existing files are displayed.
4 Select the file to be newly saved (or
overwritten) using the cross-shaped
button (JK), and press the Set button (R).
.
Memo :
Files cannot be written in the following cases.
0
(Displayed in gray, selection disabled)
When the inserted SD card is not supported or
0
not formatted. (File name appears as "---".)
When a write-protected SD card is inserted
0
(a z mark appears beside the SD card icon).
5 Name the file.
Enter the subname using the software
0
keyboard.
(A P96 [Text Input with Software Keyboard] )
You can enter up to 8 characters for the
0
[Store File]/[Picture File] subname.
Memo :
When overwriting an existing file, the subname
0
of the existing file is displayed.
Select [Cancel] and press the Set button (R), or
0
press the [CANCEL] button to return to the
previous screen.
6 Select [Store] and press the Set button (R).
.
7 Save the file.
4
.
.
8 Saving is complete.
After saving of the file is complete, "Complete"
appears on the screen, and the menu screen
closes automatically.
A confirmation screen appears when you
0
choose to overwrite.
Select [Overwrite] on the confirmation
screen, and press the Set button (R). Saving
starts, and "Storing..." appears on the
screen.
Saving starts, and "Storing..." appears on the
0
screen when the file is newly saved.
5
6
7
143