JVC GY-HM660E Instructions Manual page 119

Memo :
For details on the combinations of usable
0
[Record Format], refer to the following.
(A P47 [List of Formats] )
When [System] is set to "SD", this item is fixed
0
as follows for the different models.
U model: "60i"
0
E model: "50i"
0
When [System] is set to "HD" or "SD", the frame
0
rate and encoding bit rate for recording to the SD
cards in slots A and B will be the same.
9 Y Format a
For selecting the format of the file to be recorded to
the SD card in slot B when [System] is set to "HD
+Web" or "HD+SD".
The selectable options vary as follows according
to the [System] setting.
When "HD+Web" is selected:
0
"QuickTime(H.264)" or "AVCHD"
When "HD+SD" is selected:
0
Fixed at "QuickTime(H.264)"
Memo :
When "HD+Web" is selected, and [WFrame &
0
Bit Rate] is set to "30p", "25p", or "24p", the
format is fixed at "QuickTime(H.264)".
9 Y Resolution a
For selecting the size of the image to be recorded
to the SD card in slot B when [System] is set to "HD
+Web" or "HD+SD". (Horizontal x vertical)
The available options vary as follows according to
the [System] and [YFormat] settings.
When HD+SD is selected:
0
"720x480" (U model), "720x576" (E model)
When [System] is set to "HD+Web", and
0
[YFormat] to "QuickTime(H.264)":
"960x540" or "480x270"
When [System] is set to "HD+Web", and
0
[YFormat] to "AVCHD":
Fixed at "1440x1080"
Memo :
When [System] is set to "HD" or "SD", this item
0
is fixed at the same value as [WResolution].
9 Y Frame & Bit Rate a
For selecting the frame rate and encoding bit rate
of the image to be recorded to the SD card in slot
B when [System] is set to "HD+Web" or "HD+SD".
The available options vary according to the
[System] and [WFrame & Bit Rate] settings.
When HD+SD is selected:
0
Fixed at "60i" (U model), "50i" (E model)
When HD+Web ([YFormat] is set to "AVCHD")
0
is selected:
When [WFrame & Bit Rate] is set to "60i":
0
"60i(EP)" or "60i(LP)"
When [WFrame & Bit Rate] is set to "50i":
0
"50i(EP)" or "50i(LP)"
When HD+Web ([YFormat] is set to
0
"QuickTime(H.264)") is selected:
Fixed at "30p", "25p", or "24p"
Memo :
When [System] is set to "HD" or "SD", this item
0
is fixed at the same value as [WFrame & Bit
Rate].
9 SD Aspect
For setting the aspect ratio of the recorded image
when [System] is set to "HD+SD" or "SD".
[Setting Values: R16:9, 4:3]
Memo :
When [System] is set to "HD" or "HD+Web", this
0
item is fixed at "16:9".
119