Acquiring Positioning Information By Gps L; Viewing Recorded Videos Immediately (Clip Review) - JVC GY-HM660E Instructions Manual

Acquiring Positioning
Information by GPS l
This camera recorder comes with a built-in GPS
function. The GPS function is able to record the
positioning information.
During playback, you can also display the recorded
information on the playback screen.
(A P88 [Playing back] )
1 Set [System] B [GPS] to "On".
Positioning starts when the H icon on the
0
display screen starts blinking.
After positioning is complete, the H icon
0
switches to a solid light and records the
positioning information during shooting.
The icon that appears on the screen
0
changes according to the condition of signal
reception from the GPS satellite.
The GPS function is able to record the
0
positioning information. However, the date/
time information (atomic clock) can be
recorded only when [Format] is set to
"AVCHD" on the slot to record to.
0
4030 20 10 0
P 13000K
.
Reception
Display
Status
[GPS] is set to
"On", but signal
cannot be
.
(Yellow)
received
GPS search in
progress
.
(Blink)
GPS reception
in progress
(signal strength:
.
weak)
GPS reception
in progress
(signal strength:
.
medium)
74
00: 00: 00.00
Jan 1 2, 2016
12 :34 :56
5 . 6f t
ND 1 /64
AE 6
+
0
dB
F1. 6
1/ 100
Positioning Status
GPS signal cannot
be received. UTC
and positioning
information cannot
be obtained.
UTC information
can be obtained,
but not positioning
information.
Receiving weak
GPS signal. UTC
and positioning
information can be
obtained and
recorded.
Receiving GPS
signal. UTC and
positioning
information can be
obtained and
recorded.
Reception
Display
Status
GPS reception
in progress
(signal strength:
.
strong)
(No GPS function is
display) turned off
Memo :
If positioning cannot be performed after waiting
0
for several minutes, this means GPS reception
is poor, and there is difficulty in receiving data.
Move to an open place with no obstructions.
Otherwise, GPS information will not be recorded
when shooting is performed.
Signal may not be received depending on
0
circumstances such as locations that are
indoors or surrounded by tall buildings, or the
geographical conditions.
Precision error may occur in the position
information depending on the conditions of
reception.
Even when positioning is in progress,
0
information may be disrupted depending on the
condition of signal reception.
Viewing Recorded Videos
Immediately (Clip Review)
You can check (review) the last recorded video clip
on the screen.
However, the video clip cannot be played back if
the settings of the camera recorder are different
from the video format (Resolution/Frame & Bit
Rate/SD Aspect) of the clip.
(A P118 [WResolution a, Resolution b] )
(A P119 [ Y Resolution a ] )
(A P118 [WFrame & Bit Rate a, Frame & Bit
Rate b] )
(A P119 [ Y Frame & Bit Rate a ] )
(A P119 [ SD Aspect ] )
Memo :
To use this function, assign "Clip Review" to any
0
of the user buttons. "Clip Review" is assigned to
[C.REVIEW/7] button in factory default.
"Clip Review" can also be assigned to other user
0
buttons.
(A P38 [Assignment of Functions to User
Buttons] )
Positioning Status
Receiving strong
GPS signal. UTC
and positioning
information can be
obtained and
recorded.
The [GPS] item is
set to "Off".