JVC GY-HM660E Instructions Manual page 137

I Information Display
Use the [AE LOCK/4] button to switch between
camera information display, GPS display and
turning off the display.
The GPS display displays information on the
0
recording location of the video being played
back only when GPS information has been
recorded.
The local date/time is displayed.
Camera information display displays only
0
information of Gain, Iris, Shutter and White
Balance that have been recorded.
AE LOCK/4
Hide
+139.652172
AE LOCK/4
Oct 30,2016
07:01:58PM
GPS Display
.
Memo :
Trimming information is displayed while
0
trimming is in progress. You cannot switch the
display using the [AE LOCK/4] button during this
process.
J Date/Time Display
Displays the date/time that is recorded on the
currently played SD card.
Memo :
The date/time display style can be specified in
0
[LCD/VF] B [Display Settings] B [Date Style]/
[Time Style].
(A P111 [ Date Style ] )
(A P111 [ Time Style ] )
0
dB
F1. 6
1/ 100
P 13000K
Camera Information
Display
AE LOCK/4
+35.483197
K Network Connection Icon a
When [Main Menu] B [System] B [Network] is
set to "On(SDI Off)" or "On(HDMI Off)", the
network connection status is displayed.
This icon is not displayed when "Off" is selected.
(A P116 [ Network a ] )
Icon
Connection is not established
(starting up, preparing for
connection)
.
(Blink)
Connection is not established
(preparing for connection)
.
(Yellow)
Connection is established
.
When a USB adapter different
from the connection settings is
detected
.
(No display) When an incompatible USB
adapter is detected, or when
[Network] is set to "Off"
Memo :
When a cellular adapter that supports LTE
0
connection display is in use, "LTE" will appear to
the left of the above icon when LTE connection
is detected.
L Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data recorded in
the SD card being played back.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
*
.
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
Example of user's bit display:
0
F F E E DD 2 0
.
Memo :
You can specify whether to display the time
0
code, user's bit, or turn off the display in [TC/UB]
of [Main Menu] B [LCD/VF] B [Display
Settings].
(A P111 [ TC/UB ] )
Status
137