Suspending:
The following conditions will suspend:
•
Press <Power> key while the unit is on.
•
The duration timer of item "Switch state to Suspend" expires,
which indicates that there has been no use for a specified of time.
•
The battery pack is completely discharged.
•
Tap Start > Suspend
2.6.2
Resuming
Use one of following methods to resume (wake up the PDT):
•
Press <Power> key to suspend or resume (wake up).
•
Put the PDT into a dock.
When a battery pack completely discharges while the unit is in suspend
mode, the PDT remains suspended until discharged battery condition is
corrected.
Tap here to let PDT enter into
suspend mode
49
Chapter 2