Table of Contents
Advertisement
d three more times. Scan Save OCR Template. This would let you read
any string of three digits, "ABC," then any string of three digits, for
example:
Adding Spaces
You may also need to put spaces in your template.
Example: You need to read three digits, space, three specific characters
(ABC), space, three digits. The template would be:
To create this template, you would enable the OCR-A font. Scan the
Enter OCR Template symbol. Scan the d from the
Chart
in the back of this manual three times, and then scan 2041424320
from the
Programming Chart
ters for "space," "A," "B," "C," "space"). Scan the d three more times,
and then scan Save OCR Template. This would let you read any string
of three digits, space, "ABC," space, and then any string of three digits.
For example:
Note: If using Quick*View to program, use the space bar to designate a
space and not the hex value of 20.
4.
Exit OCR Template Editor
Scan Save OCR Template to save your entries. Discard OCR
Template exits without saving any OCR Template changes.
Stringing Together Multiple Formats (Creating "Or" Statements)
You may want to program the imager to accept many OCR formats. To
do this, you would string together each format with a "t." This tells the
imager to read optical characters that match any one of the formats in the
template.
on the inside back covers (the hex charac-
179
OCR Programming
Chapter A
Advertisement
Table of Contents
