A.3.5
Code 39
Function Explaining:
Item
Symbol Enable
Check Char/Digit
Enable
Check Char/Digit
Transmit
Start/Stop Transmit
MARS-1030 User Manual
Explaining
Enable this barcode
The scanner reads barcode data with a
check digit. If not checked, the barcode will
be read as though no check digit was
present.
The scanner will only read Code 39 barcode
printed with a check digit, and will transmit
this character at the end of the scanned
data. This setting is only valid if check char/
digit is enabled.
Start/Stop characters identify the leading
and trailing ends of the barcode.
164