b)
Place the spare battery pack into the Single Cradle's spare Battery
charging slot
1.
Connect the power cord to the power adapter
2.
Connect the power cord to a power source
3.
Plug in the connector of the power adapter with Single Cradle
4.
Insert the Battery pack into the Single Cradle's spare Battery slot.
•
When charging the Battery pack in the Single Cradle's spare
Battery slot, the Single Cradle charging LED will turn on Red.
After the Battery pack is fully charged, this LED will turn to Green.
CAUTION:
PDT after you have already full-charged the Battery pack and
backup battery pack and start to use the PDT. Otherwise the data
stored inside SDRAM memory will be lost. Please also keep in
mind power the PDT off if you want to change the main Battery
pack.
Please do not remove the Battery pack too long from
23
Chapter 2