Table of Contents
Advertisement
2.5.2
Entering the Data
To select and open programs, select Start > Programs from the task bar
to open a list of available programs. Or if the program has a icon on the
desktop, double-tap to open it.
There are several ways to enter data on the PDT once in an application:
•
Use the keypad to enter alpha-numeric characters, Refer to "2.4.7
Using the keypad" on page 2-11.
•
Use the stylus on the touch screen on page 2-11 for more informa-
tion on using .the stylus.
•
Select text in the same way you select the text on a PC. Use the
stylus to highlight the desired text by dragging the stylus across the
desired text, double-tapping to select one word and triple-rapping
to select an entire line/paragraph. Refer to "2.5 Navigating the
Display" starting on page 2-21
•
Use the soft input panel (digital keyboard) with the stylus. Refer to
"2.5.5 The Soft Keypad" on page 2-23.
•
Use the bar code scanning to enter data. Press the trigger or "Bar
Code Start " key to initiate a scan. The scanned data will enter the
current application's open file. Refer to "2.5.7 Scanning Barcode"
starting on page 2-24 for more information on using a scanner.
For more information on factory installed applications, Refer to Chapter 4
" Software Programs".
2.5.3
The Command Bar
Use the Command bar at top of the screen to perform tasks in programs,
such a opening a file, or editing a file.
MARS-1030 User Manual
42
Advertisement
Table of Contents
