Table of Contents
Advertisement
Table 2.1: Description of PDT General View
1
Scanner LED Indicator
2
Charge LED Indicator
3
LCM / Touch Panel
Left Scan key
4
Right Scan key
Scan key
5
Power key
6
F1 ~ F4 key
7
Navigation key
8
Alpha-Numeric keys
9
Alpha key
10 Fn key
11
Enter key
Earphone Jack Con-
12
nector
USB / Serial / Synchro-
13
nization port
14 Scan window
15 Stylus
16 Battery Cover
17 Battery cover Latch
18 Hand Strap
19 Speaker
20 DC Power Jack
21 End Cap
MARS-1030 User Manual
"Red" color
"Green" color
"Red" color
"Green" color
Do specific action through touch panel by
stylus
Start scanning the barcode by pressing any
one of these three scan keys
Puts the terminal into and wakes the
terminal from suspend mode.
The four application keys, hot keys of
application program defined by end user.
Navigation keys for left, right, up and down
directions
Numeric keys, Change to Alpha keys after
pressing Alpha key.
Toggle Alpha-mode for Alpha-Numeric keys
This key is used in combination with other
keys to type special characters and perform
system functions.
This key confirms data entry
A connector to plug a earphone
A connector to support USB Host/Client
and serial functions
A window for scanning of barcode reader
Use the stylus for selecting items and
entering information.
Protect Battery pack, keep the switch of
battery cover to leave system from suspend
mode
To keep Battery Cover locked
This strap can be sealed tighter or looser
1.5W speaker for audio sound
A connector to support AC power.
Protect CF slot and SD slot from dust and
water
16
Reading barcode
Successful reading
Charging battery
Battery charged full
Advertisement
Table of Contents
