Maintenance And Service; Maintenance: Frequency And Tasks; Maintenance Tasks - Homeowner - Heat & Glo 6000CL-IFT-S Owner's Manual

Hide thumbs Also See for 6000CL-IFT-S:
Table of Contents

Advertisement

4 4

Maintenance and Service

Any safety screen or guard removed for servicing must be
replaced prior to operating the fireplace.
When properly maintained, your fireplace will give you
many years of trouble-free service. Contact your dealer
to answer questions regarding proper operation, trou-
bleshooting and service for your appliance. Visit www.
heatnglo.com to locate a dealer. We recommend annual
service by a qualified service technician.
A. Maintenance: Frequency and Tasks
Task
Frequency
Glass Cleaning
Seasonally
Decorative Fronts/
Surrounds
Remote Control
Seasonally
Venting
Seasonally
Gasket Seal and
Glass Inspection
Log Inspection
Firebox Inspection
Control
Compartment &
firebox Top
Burner Ignition &
Operation
LED Accent
As needed
Lighting
Black Glass
Refractory
Refractory, Grate
and Valve Assembly
As needed
Removal
Burner
Identification/
As needed
Verification
16
To be completed
by
Annually
Homeowner
Annually
Annually
Annually
Annually
Annually
Qualified Service
Technician
Annually
Heat & Glo • 6000CL-IFT, 8000CL-IFT Owner's Manual • 2504-981 Rev. K • 12/20
B. Maintenance Tasks - Homeowner
Installation and repair should be done by a qualified service
technician only. The appliance should be inspected before
use and at least annually by a professional service person.
The following tasks may be performed annually by the
homeowner. If you are uncomfortable performing any of
the listed tasks, please call your dealer for a service ap-
pointment.
More frequent cleaning may be required due to excessive
lint from carpeting, bedding material, etc. It is imperative
that control compartments, burners and circulating air
passageways of the appliance be kept clean. Any safety
screen, guard, or barrier removed for servicing the appli-
ance must be replaced prior to operating the appliance.
CAUTION! Risk of Burns! The fireplace shall be turned
off and cooled before servicing.

Advertisement

Table of Contents
loading

Table of Contents