Heat & Glo 6000CL-IFT-S Owner's Manual page 9

TV on the wall
TV Wall
Bracket
Appliance
Notes:
1. These are good faith recommended clearances only and not a guarantee of compliance with all TV
manufacturers' maximum allowable opera ng temperatures.
2. Since every home has unique air ow characteris cs and maximum allowable opera ng temperatures
can vary from manufacturer to manufacturer and from model to model, actual TV temperatures should
be validated at the me of each installa on. TVs should not be used in situa ons where the actual TV
temperature exceeds the manufacturers' maximum allowable opera ng temperatures iden
TV's technical speci ca ons. Contact the TV's manufacturer directly if you cannot locate this
informa on or have ques ons regarding the informa on.
3. Mantel height and depth must conform to mantle requirements specified in the appliance installa�on
manual.
4.
"C" dimension taken from the top of the hood or appliance opening.
5.
Sugges ons on how to further reduce TV temperatures:
a.
b.
Figure 3.4 Good Faith TV Guidelines
Good Faith Guidelines for TV Installa�ons Above Appliance
TV
Item Minimum Dimensions
A 2.5 inches
2 inches minimum to 3 inches
B
maximum
C 18 inches
Wall Brkt + TV Thickness + 2.5
D
inches
A
B
Mantel
D
C
Increase "A" dimension.
Increase "C" dimension, however, increasing "B" dimension beyond maximum recommended
typically results in higher temperatures.
Heat & Glo • 6000CL-IFT, 8000CL-IFT Owner's Manual • 2504-981 Rev. K • 12/20
TV recessed into the wall
A
C
Appliance
ed in the
B
9