LG F6V910WTSA Owner's Manual page 44

global_main.book.book Page 44 Monday, May 10, 2021 9:22 AM
OPERATION
44
2
Turn the knob to select the desired
cycle.
3
Press the Dispenser 1 or Dispenser 2
button to increase or decrease the
dispensed amount from the set
defaults.
Buttons
Indicator
*1 The default settings are
configured to dispense 42 ml of
detergent and 30 ml of softener for
4-6 kg of normally soiled laundry.
4
Press the Start/Pause button.
NOTE
• Use the manufacturer's
recommendations on the detergent or
fabric softener package when setting
the ezDispense amounts for a
standard 4-6 kg load.
• Most cycles will automatically use the
default amounts you have set,
indicated by the Normal LED light on
the Dispenser 1 and Dispenser 2
buttons.
• The Delicates, Sportswear, and Tub
Changing Default Dispense
Amounts
The default settings are configured to
dispense 42 ml of detergent and 30 ml
Dispensed
of softener for 4-6 kg of normally soiled
*1
Amount
laundry.
Detergent should be used according to
the instruction of the detergent
More (110%)
manufacturer and selected according to
type, colour, soiling of the fabric and the
washing temperature.
Normal (100%)
1
2
Less (90%)
Off (0%)
3
4
Clean cycles turn the ezDispense
function off by default.
Press the Power button.
Change default dispense amounts.
• Dispenser 1 : Press and hold the
Dispenser 1 button for 3 seconds.
• Dispenser 2 : Press and hold the
Dispenser 2 button for 3 seconds.
Turn the knob to increase or decrease
the amount of detergent or fabric
softener. The amount is shown in the
display.
• The default amounts can be
increased or decreased in 1 ml
increments, within a range of 9 ml
to 150 ml. The amount dispensed
may vary slightly depending on the
model.
Save the default changes.
• Dispenser 1 : Press and hold the
Dispenser 1 button for 3 seconds.
• Dispenser 2 : Press and hold the
Dispenser 2 button for 3 seconds.