Table of Contents
Advertisement
global_main.book.book Page 19 Monday, May 10, 2021 9:22 AM
Levelling the Appliance
Checking the Level
When pushing down the edges of the
top plate diagonally, the appliance
should not move up and down at all
(check both directions).
• If the appliance rocks when pushing
the top plate of the appliance
diagonally, adjust the feet again.
• Check whether the appliance is
perfectly level after installation.
NOTE
• Timber or suspended type flooring
may contribute to excessive vibration
and unbalance. Reinforcement or
bracing of the timber floor may need
to be considered to stop or reduce
excessive noise and vibration.
Adjusting and Levelling the
Feet
When installing the appliance, the
appliance should be aligned and
perfectly level. If the appliance is not
aligned and level properly, the appliance
may be damaged or may not operate
properly.
1
Turn the levelling feet as required if
the floor is uneven.
• Do not insert pieces of wood etc.
under the feet.
INSTALLATION
• Make sure that all four feet are
stable and resting on the floor.
NOTE
• Do not install the washing machine on
a plinth, stand or elevated surface
unless it is manufactured by LG
Electronics for use with this model.
2
Check if the appliance is perfectly
level using a spirit level
3
Secure the levelling feet with the lock
nuts
by turning anti-clockwise
B
against the bottom of the appliance.
19
.
A
Advertisement
Table of Contents
