Image Stabilizer - Canon RF70-200mm F4 L IS USM Instructions Manual

7. Image Stabilizer

Image stabilization corrects vibrations that occurs with hand-held shots.
Image stabilizer switch
1
Set the STABILIZER switch to ON.
z If you are not going to use image stabilization, set
the image stabilizer switch to OFF.
Image Stabilizer modes
z
MODE 1: Corrects vibrations in all directions.
It is suited to shooting still subjects.
z
MODE 2: When you take a panning shot either horizontally or vertically, corrects vibrations at right
angles to the direction of panning.
It is suited to shooting moving subjects.
z
MODE 3: During exposure, corrects vibrations in the same way as MODE 2.
Since vibration is corrected only during exposure, It is suited to shooting irregularly
moving subjects.
Image stabilizer mode selector switch
2
Select an Image Stabilizer mode
according to the application and shooting
conditions.
ENG-10