Non-Ethernet Connection; Connecting And Disconnecting The Multi-Interface Cable - Datalogic BC90-STAR Series Quick Reference Manual

Non-Ethernet Connection

The BC9xx0 cradle provides a multi-interface connector and a power supply
connector as shown:
Power Supply

Connecting and Disconnecting the Multi-Interface Cable

The BC9xx0 can be connected to a Host by means of a multi-interface cable,
which must be simply plugged into the Host connector, visible on the front
panel of the cradle.
To disconnect the cable, insert a paper clip or other similar object into the hole
corresponding to the Host connector on the body of the cradle. Push down on
the clip while unplugging the cable. Refer to the following figures:
Quick Reference Guide
Connecting/Disconnecting the Cable
Multi-Interface Connector
RS-232
System Connections
Interface Emulation
to Host
Power
7