Datalogic CHR-PM80 Quick Reference Manual

Datalogic ADC, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2007-2014 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the contents of this documentation
or the procedures described therein may be reproduced or transmitted in any form or by
any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or
affiliates ("Datalogic" or "Datalogic ADC"). Owners of Datalogic products are hereby
granted a non-exclusive, revocable license to reproduce and transmit this documentation
for the purchaser's own internal business purposes. Purchaser shall not remove or alter
any proprietary notices, including copyright notices, contained in this documentation
and shall ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Datalogic representative. Electronic versions may either be
downloadable from the Datalogic website (www.datalogic.com) or provided on
appropriate media. If you visit our website and would like to make comments or
suggestions about this or other Datalogic publications, please let us know via the
"Contact Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic reserves the right to change any specification
at any time without prior notice. Datalogic and the Datalogic logo are registered
trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. All
other brand and product names may be trademarks of their respective owners.
PATENTS
This product is covered by US Pat. 7,948,214 B2. Additional patents pending.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log
on to www.datalogic.com and click on the links indicated for further information
including:
•
PRODUCTS
Search through the links to arrive at your product page where you can download
specific Manuals and Software & Utilities including:
- Datalogic Aladdin™, a multi-platform utility program that allows device
configuration using a PC. It provides RS-232 interface configuration as well as
configuration barcode printing.
•
SERVICE & SUPPORT
- Technical Support - Product documentation and programming guides and
Technical Support Department in the world
- Service Programs - Warranty Extensions and Maintenance Agreements
- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA)
Repairs.
- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.
•
CONTACT US
Information Request Form and Sales & Service Network
UPDATES AND LANGUAGE AVAILABILITY
UK/US
The latest drivers and documentation updates for this product are available on the
Internet.
Log on to: www.datalogic.com
I
Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo
prodotto.
Collegarsi a: www.datalogic.com
D
Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation für
dieses Produkt.
Adresse : www.datalogic.com
F
Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur
Internet.
Cliquez sur : www.datalogic.com
E
En Internet están disponibles las versiones actualizadas de los drivers y documentación
de este producto.
Dirección Internet : www.datalogic.com
CHR-PM80
BATTERY CHARGER
QUICK REFERENCE GUIDE
820042914 (Rev. C) February 2014
SYSTEM CONNECTIONS
Connections should always be made with power off!
CAUTION
Apply power to the CHR-PM80 by connecting a power supply unit to the connector
on the rear panel of the battery charger. CHR-PM80 is ready to charge
PowerScan™ M8300 laser readers.
SERIAL CONFIGURATION OPTIONS
In addition to the battery charge function, CHR-PM80 can be connected to a PC by
means of an RS-232/USB interface to send new configuration strings from the PC to
the scanner, to upgrade application software onto the PowerScan™ M8300 reader
or optionally when performing the copy configuration procedure.
RS-232/USB
Interface
Connector
Power Supply
To proceed with these operations, connect an RS-232 or USB cable between
CHR-PM80 and the PC. Connect the power supply to CHR-PM80. Insert the
PowerScan™ M8300 reader into the battery charger.
COMPLIANCE
POWER SUPPLY
This device is intended to be supplied by a UL Listed/CSA Certified Power Unit
marked "Class 2" or LPS power source rated 10-30 V DC, minimum 1 A, which
supplies power directly to the device
.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval
of Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference which
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
WEEE COMPLIANCE
For information about the disposal of Waste Electrical and Electronic
Equipment (WEEE), please refer to the website
www.datalogic.com.
USING CHR-PM80 BATTERY CHARGER
CHR-PM80 is a battery charger for PowerScan™ M8300 laser readers.
The LEDs signal the CHR-PM80 status, as described in the following table:
LED STATUS
Aux Yellow On = CHR-PM80 is powered through an external power supply.
Yellow Blinking = CHR-PM80 transmission occurs over the Host port.
Host Yellow On = CHR-PM80 is powered by the Host.
Yellow Blinking = CHR-PM80 transmission occurs over the Host port.
Reader Green On = the reader battery is completely charged.
Red On = the reader battery is charging.
Orange Blinking = reader battery fault – replace battery.
Red / Green Alternatively Blinking = charging error – see Ref. Manual
Spare* Green On = the spare battery is completely charged.
Red On = the spare battery is charging.
Orange Blinking = spare battery fault – replace battery.
Red / Green Alternatively Blinking = charging error – see Ref. Manual
•
This LED refers to the accessory SBS-8000 Spare Battery Slot when
mounted to the CHR-PM80.
Figure 1 – CHR-PM80 Overview Figure 2 – CHR-PM80 LEDs
TECHNICAL FEATURES
Electrical Features
Supply voltage
External Power 10..30 VDC
Host Power 5 VDC ±10%
Power consumption
External Power max. 10 W (charging) *
Host Power max. 500 mA (charging)
Ext. Power/Data yellow LED
USB power/data yellow LED
Indicators Reader batt. state green/red LED
Spare batt. state green/red LED
beeper
Time of recharge
External Power max. 4 hours with 2150 mAh Li-Ion battery
Host Power max. 10 hours with 2150 mAh Li-Ion battery
Environmental Features
0° to +40 °C / +32° to +104 °F
Working Temperature
-20° to +70 °C / -4° to +158 °F
Storage Temperature
Humidity 90% non condensing
Protection Class IP40
Mechanical Features
204 x 108 x 95 mm / 9.44 x 4.25 x 3.74 in
Weight
at
Cable Length 2 m (6 ft 6 in)
Material ABS
* Having a switching regulator inside, the CHR-PM80 draws the same power,
regardless of the supply voltage. I.e., as the input voltage increases, the current
drawn decreases.