Installation
Installation
To set up your BC9xx0 cradle you must:
1.
Physically install the cradle.
2.
Make all system connections.
3.
Configure the BC9xx0 cradle.
Mounting the BC9xx0 Cradle
The cradle package contains the following items:
• BC9xx0 Base Station (with Desktop
Mounting Bracket installed)
• BC9xx0 Quick Reference Guide
(this manual)
• 1 Ferrite Clamp (Ethernet models only)
The cradle can be either mounted on a flat surface for desktop usage or
affixed vertically to a wall.
Mounting Brackets
The cradle comes with two different mounting brackets. The appropriate
bracket is used depending on whether the cradle will be mounted on a hori-
zontal or vertical surface. When shipped, the cradle has the Desktop Mount-
ing Bracket installed. For vertical installation, the Wall Mounting Bracket
must be attached instead.
Figure 1. Mounting Brackets
Tab
Desktop Mounting Bracket
(Horizontal )
2
Ribs
• 1 Metal Mounting plate
• 1 Wall Mounting Bracket
Tabs
Wall Mounting Bracket
Bosses
(Vertical)
BC 9xx0 Cradle
Tab