Datalogic DL-AXIST Four Slot Battery Charger Quick Start Manual

Four Slot Battery Charger
Quick Start Guide
Overview
The DL-Axist four slot battery charger simultaneously charges up
to four spare batteries.
Out of the Box
The DL-Axist four slot battery charger package contains:
1. DL-Axist four slot battery charger
2. Power supply
Parts and Functions
Power ON LED
Spare
Battery Slot
822002091 (Rev. A)
Set Up
To prevent the risk of short-circuiting, connect wall power in the
following order:
1. Connect the four slot battery charger to the power supply.
2. Connect the power supply to the power cord.
3. Connect the power cord to the wall outlet. The Power ON
LED illuminates green.
Charge the Spare Batteries
To charge up to four spare batteries:
1. Insert the spare battery into the spare battery slot,
contacts side first, and then snap it into place. Ensure the
label side is facing up. The dock's spare battery charge LED
illuminates red.
Spare
Battery
Charge LEDs
2. When charging is complete, pull the tab and lift the battery
out of the slot.
Nov. 2017
The spare battery pack recharging slot is compatible with the
following batteries:
• 94ACC0128 DL-Axist Standard Battery Li-Ion 3200 mAH,
3.8V
• 94ACC0129 DL-Axist Extended Battery Li-Ion 6400 mAH,
3.8V
The DL-Axist four slot battery charger could get warm
during charging, this is normal and does not mean a
malfunction.
NOTE
Annual replacement of rechargeable battery pack
avoids possible risks or abnormalities and ensures
maximum performance.
CAUTION
LED Indicators
LED Status
Power On
Solid Green Charger is powered.
Spare Battery Charge
Solid Red Spare Battery is charging.
Solid Yellow Charging complete.