Selecting the Interface Type
Resetting Standard Product Defaults
Reference the PRG for a listing of standard factory settings. If you aren't sure
what programming options are in your reader, or you've changed some
options and want the factory settings restored, scan the
Default Settings
rently active interface to the current configuration.
CAUTION
To change the defaults refer to the PowerScan
™
Aladdin
Configuration program, both downloadable from the Datalogic web-
site.
Compatibility with the PowerScan™ 8000 family
The BC9xx0 can be programmed to operate in a mode compatible with the
PowerScan 8000 family. For further details and for the relevant configuration
strings and labels, refer to the PRG.
20
bar code below to copy the factory configuration for the cur-
Factory defaults are based on the interface type. Configure the
reader for the correct interface before scanning this label.
Standard Product Default Settings
Scanning this bar code will RESET all settings for the PowerScan
PM9500. Any customized settings that may have been applied to
the reader will be lost.
Standard Product
™
9500 PRG, or to the Datalogic
BC 9xx0 Cradle