TiX620, TiX640, TiX660, TiX1000
Users Manual
Saving Images
In order to save the thermal image, the button is
required. The following variants are possible:
Saving with "Check"
1.
Push the button halfway down.
The live image is frozen: .
•
The frozen image can initially be "checked" on
the display or viewfinder.
•
If the image is not to be saved, push the
button: .
2.
Push the button completely.
The image is saved.
The process of writing the data is indicated by the
changing color of the map symbol (in the line below the
image, right-hand side):
camera control automatically activates the Live mode:
.
1-24
. When saving, the
Quick Saving
Immediately push the button completely. The image is
saved immediately:
automatically re-activates the Live mode: .
Deviating from the factory setting described
above, the button can be used to trigger
further functions such as shutter activation,
autofocus, VIS-LED, Laser Distance Meter/laser
pointer before saving the image.
, the camera control then
Note