Interfaces; Technical Data - Fluke TiX660 User Manual

TiX620, TiX640, TiX660, TiX1000
Users Manual

Interfaces

The Product is equipped with the following interfaces:
•
drive for SD/SDHC card (behind the cover on the left
side of the camera, unfold the display)
•
DVI-D (HDMI socket) behind the cover on the
backside of the camera, composite video (LEMO
14-pin)
•
2 x digital E/A for external trigger input/trigger output
(TTL level, LEMO 14-pin)
•
2 x analog output 0-5V (LEMO 14-pin)
•
RS232 (LEMO 14-pin)
•
GigE-Vision (LEMO 8-pin)
Simultaneously using several interfaces on the 14-pin
LEMO socket is allowed for by means of a breakout box.
The breakout box is also used for external power supply.
As an alternative to the digital high-resolution DVI-D
image data on the HDMI socket, the analog image data
(4:3 PAL/NTSC) is available as FBAS signal (composite)
on the 14-pin LEMO socket. The HDMI socket can be
used to connect screens processing a resolution of
1280 x 768 or 1280 x 800 in accordance with the VESA
standard.
In connection with the provided software, the GigE-Vision
interface allows for remotely controlling the thermography
system, as well as for transmitting digital image
information to a PC in real time.
1-12

Technical Data

Spectral range ................................ 7.5 μm to 14 μm
Temperature measurement range
TiX1000, TiX660 ......................... -40 °C to +1200 °C
TiX640 ........................................ -40 °C to +1200 °C
TiX620 ........................................ -40 °C to +600 °C
Measurement accuracy
TiX640, TiX660, TiX1000 ............ ±1.5 K or ±1.5 %
TiX620 ........................................ ±2.0 K or ±2 %
Image resolution (pixels)
TiX1000 ...................................... 1024 x 768
TiX660 ........................................ 640 x 480
TiX640, TiX620 ........................... 640 x 480
(-40 °F to +2192 °F)
with high temperature option:
up to 2000 °C (3632 °F)
(-40 °F to +2192 °F)
(-40 °F to +1112 °F
2048 x 1536 (SuperResolution)
1280 x 960 (SuperResolution)