Controls And Displays - Hama EWS-840 Operating Instructions Manual

G Operating instruction

Controls and Displays

A Base station
1. Measuring station wireless symbol
2. Channel display
3. Time
4. Day
5. Month
6. Alarm symbol
7. Weekday / seconds
8. Wireless symbol
9. Time zone
10. Room temperature
11. Room temperature trend
12. Outdoor temperature
13. Outdoor temperature trend
14. button = increasing the current setting / activating/ deactivating manual radio signal
reception
15. button = reducing the current setting / manually searching for the signal from the
measuring station
16. mode button = settings / confirming the setting / toggling between seconds, weekday
and time zone display
17. alarm button = display / setting alarm modes
18. channel button = channel selection
19. mem. button = accessing/ resetting the stored maximum/minimum values
20. Battery compartment
B Measuring station
21. Battery compartment
22. Mounting plate
23. Cut-out for vertical mounting
24. Cut-out for horizontal mounting
25. Clips
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep
these instructions in a safe place for future reference. If you sell the device, please pass these
operating instructions on to the new owner.
2