Low Battery Capacity; Care And Maintenance; Warranty Disclaimer - Hama EWS-840 Operating Instructions Manual

Table of Contents

Available languages

Display

6.5. Maximum and minimum temperature values

The base station automatically stores the maximum and minimum outdoor/indoor

temperature.

• Repeatedly press the mem. button (19) to switch between the current temperature,

minimum temperature (MIN) and maximum temperature (MAX).

• Press and hold the mem. button (19) for approx. 3 seconds to reset the stored maximum

and minimum values.

6.6 Low battery capacity

As soon as the battery symbol

the batteries in the base/measuring station is very low. Replace the batteries immediately.

Note – Replacing the batteries

• Note that the stations have to be resynchronised each time after you change the

batteries in the measuring or base station.

• To do this, remove the batteries from the other station and then reinsert them, or

change them as required.

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive

cleaning agents.

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting

from improper installation/mounting, improper use of the product or from failure to observe

the operating instructions and/or safety notes.

appears on the display of the base station, the capacity of

Trend

Increasing

Constant

Decreasing

Table of Contents