Advertisement
Batteries
Button cells
Turn on to get 'normal display mode'. On the normal mode, press MODE to get the following mode successively.
In normal mode, press °C/°F to °C/°F switchover, press MAX/MIN to check the max or min of the temperature and humidity.
In normal mode, press 12/24 more than 2 seconds to switchover 12/24 hours.
In alarm mode, '' is shown, press MODE more than 2 seconds with 12/24 or °C/°F to set alarm.
When setting, clock will quite unless any key is pressed within 7 seconds
The normal time 0:00 will be displayed when clock is turned on
In normal mode, press MODE more than 2 seconds with 12/24 or °C/°F to time setting.
In normal mode, press MODE to enter into date setting mode, and press MODE more than 2 seconds to setting.
Setting range: year 2000-2099, month 1-12, date 1-31
Day (from MON to SUN) will change accordingly while date is being set
When setting, clock will quite unless any key is pressed within 7 seconds and present time and date will be displayed.
In normal mode, press 12/24 more than 2 seconds to get 12/24hour switchover.
In normal mode, press MODE for 2 times to enter alarm mode then press MODE more than 2 seconds to set.
Press 12/24 to turn on or off alarm.
When setting, clock will quite unless any key is pressed within 7 seconds and present time and date will be displayed
If '' is on without snooze, the bell will sound for 2 minutes when the set time is reached, press any key to stop bell. If snooze is turned on, bell will ring every 8 minutes and 2 minutes each time.
When snooze rings, press any key to stop alarm and snooze function.
When both bell and snooze are not at ON position, bell and snooze turn off at same time, snooze function will effect only when the bell symbol is at ON position.
In normal mode, press °C/°F to switchover °C/°F.
Press MAX/MIN to check the history max./min. temperature and humidity.
When humidity is below 40% and temperature is any value, it shows DRY.
When humidity is beyond 70% and temperature is any value, it shows WET.
When temperature is in 20°~25° and humidity is in 40%~70%,it shows COM.
When temperature is not in range of 20°~25° but humidity is in 40%~70%,it shows nothing.
Note
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies:
Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/batteries, you are making an important contribution to protecting our environment.
Hama GmbH & Co KG
86652 Monheim/Germany
Service & Support
+49 9091 502-0
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Hama TH50 - Thermometer/Hygrometer Operating Instructions
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the TH50 that isn't answered in the manual? Leave your question here.