Identification; Provided; Greenlee Textron - Greenlee 855 Instruction Manual

Identification

4
1
14
10
17
2
16
1. Bender power head
2. Trunnion support frame
3. 1-1/2" to 2" bending shoe
4. 1/2" to 1-1/4" bending shoe
5. 1-1/2" to 2" support roller system
6. Support roller engagement handle
Features
The 855 bender is designed to make high quality bends
of up to 90 degrees in 1/2" to 2" EMT, IMC, rigid steel,
and rigid aluminum conduit. It incorporates a number of
features to make bending easier and faster.
• Four large wheels allow easy transportability.
• Powerful motor and efficient gearbox can bend 2" rigid
in 11 seconds.
• Working height at waist level reduces need for the
operator to bend over.
• All conduit bending can be done without changing
shoes or rollers.
• Conduit bending can be done in a vertical plane while
keeping the conduit level or in a horizontal plane to
allow making kicks and offsets.
• Simple roller system automatically adjusts to EMT or
IMC conduit sizes.
• The zero position for bending is automatically set by
selecting the size and type of conduit to be bent prior
to bending.
• Bender automatically compensates for conduit spring-
back so you simply bend to the desired angle without
using charts.
Greenlee Textron / Subsidiary of Textron Inc.
855 Smart Bender™
11
3
5
7
6
8
855 Smart Bender™
7. Support roller locking cam
8. Support roller squeeze adjustment
9. Transport handle
10. Bender head pivot lock knob
11. Shoe retaining lock ring
12. Open storage area
9
16
• Programmable memory allows you to preselect a
desired angle and automatically bend to that angle for
one or more bends.
• Programmable bend angle adjustment allows you to
compensate for over-bending or under-bending conduit.
• Digital display gives accurate readout of actual bend or
programmed angle.
• Eccentric roller system squeeze adjustment allows
easy adjustment for variations in conduit.
• Removable pendant control prevents unauthorized use
of the bender.
• A lockable storage area is provided for the instruc-
tions, pendant control, etc.
• Lifting eyes are provided for easy hoisting.
• Stubs, offsets, and saddles can be easily made. An
optional deluxe hand terminal tells you where to make
the conduit marks for any type of common bend and
bend to the proper angle.
• Standard bender is fully upgradable with the optional
deluxe hand terminal.
• Optional shoe group attachment for bending 1/2" to 2"
40 Mil PVC-coated rigid steel conduit.
7 4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
19
15
18
4
12 13
13. Lockable storage area
14. Power switch/circuit breaker
15. Pendant control receptacle
16. Leveling jack screws
17. Lifting eyes
18. Conduit size selector switch
19. Conduit type selector switch