Table Of Contents; Description; Safety; Purpose - Greenlee 855 Instruction Manual

Table of Contents

Description ................................................................... 2
Safety ........................................................................... 2
Purpose ........................................................................ 2
Important Safety Information ................................... 3-4
Grounding Instructions ................................................. 5
Specifications ............................................................... 6
Identification ................................................................. 7
Transportation .............................................................. 8
Setup ............................................................................ 8
Operation
Standard Pendant .............................................. 9-10
Deluxe Pendant ................................................ 11-12
Installing and Bending Conduit ........................ 13-18
Special Bending Information ................................ 19-27
Assembly for 40 Mil PVC-Coated
Rigid Bending Accessories .................................... 28
Adjustments ......................................................... 29-30
Maintenance ........................................................ 30-31
Bender Head Disassembly .................................. 32-37
Motor Disassembly .................................................... 37
Trunnion Disassembly ............................................... 38
Exploded Views, Parts Lists,
Schematics and Wiring Diagrams ....................... 39-49
Troubleshooting ................................................... 50-62
Greenlee Textron / Subsidiary of Textron Inc.
855 Smart Bender™
KEEP THIS MANUAL

Description

The 855 Smart Bender™ is designed to bend 1/2"
through 2" EMT, IMC, rigid steel and rigid aluminum
conduit from 0 through 90 degrees. 1/2" through 2"
40 Mil PVC-coated rigid steel conduit can also be bent
with optional 01700 shoe group attachment. The Smart
Bender™ operates similar to other Greenlee electric
benders with the bending action accomplished through
a rotating shoe with a hook and stationary roller conduit
supports.
Note: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
Do not make any modifications to this device.
Unauthorized changes or modifications will void the
user's authority to operate this device under United
States federal law.

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information

provided.

Purpose of this Manual
This manual is intended to familiarize personnel with
the safe operation and maintenance procedures for the

Greenlee 855 Smart Bender™.

Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge.
Greenlee and are registered trademarks of

Greenlee Textron.

Loctite is a registered trademark of Loctite Corporation.
2 4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070